Product description

The factory for a variety of different specifications of the terminal crimping operation, we must use a variety of hand crimping terminal crimping pliers, very inconvenient. If the use of FEK-5ND pneumatic multi-purpose terminal crimping, cutting machine, as long as the type according to different terminals, choose suitable crimping die, which is a multi-purpose machine pressed, can play the role of efficient work, but also can reduce operator fatigue!

Product features

1、One machine is multi-purpose, can be realized by changing different crimping die.

2、Foot switch ordinary or pressure - type (can be selected), there are air pressure regulator, can adjust the pressure to maintain the time to ensure that the precise sealing pressure, to prevent the problem of insufficient pressure.

3、The utility model has the advantages of light weight, simple operation, fast speed and convenient carrying. The utility model has the advantages of convenient operation and high efficiency. The utility model can carry out the high efficiency crimping operation about 1200 times per hour.

Operating instructions
Before using this equipment, it is recommended that the user read this manual in detail, to understand the use of this equipment and technical performance indicators.

■ Usage method
• Please insert the corresponding signs according to the equipment and its accessories
• When the air source is opened, the clamping head of the equipment should be in an open state before pressing
• After installing the fixture, slow down the pedal valve to make the machine run at low speed to check the installation effect of the fixture
• Will be pressed to the end of the corresponding position of the fixture, the foot pedal valve, pressure after the completion of the valve can be loosened
• The pressing speed can be controlled manually according to the speed of the stepping air valve, or a pipe joint with a throttle valve is adjusted

■ Conditions of use and precautions
• This equipment uses fluid: compressed air
• Environment and fluid temperature: 5~60℃。
• Equipment cylinder should be used after 40 μm medium filter can be used as the filter (ie, the air cylinder should be used after the air filter filter)
• Equipment access to the pipeline, should choose the appropriate trachea and joint and must clear the internal stolen goods, to prevent debris into the cylinder and damage the cylinder
• When you press the square head, please ensure that the air supply and air pressure
• If it is used in low temperature environment, the measures should be taken to prevent the water from freezing。
• Recommendations: the use of the cylinder after the use of lubricating oil (that is, the gas pipeline in the installation of oil mist; it is recommended to use No. 1 turbine oil ISOVG32)。

■ Maintenance notice
• Before use, add a little lubricating oil at the shaft of the machine, which can prolong the life of the machine
• This product is pneumatic products, whether it is used or stored are not placed in high, low temperature, high humidity environment
• When not in use should be kept clean, dry, avoid rust, open the inlet and outlet should be blocked with dust caps or other measures to prevent dust

■ Fixture replacement instructions
• Close the gas source to avoid the risk of false touch
• Remove clamp retaining screws with the attached screwdriver
• Replace the fixture on the fixture and fix the screws again

■ Precautions when handling fixture
• The fixture is used in pairs, please confirm that the upper and lower clamping fixture is in the middle position
• After the installation of the fixture, the slow movement of the foot valve to make the machine running at low speed to check the installation of the fixture

■ Quality assurance
Feierke ensure that all products in the factory have to undergo a rigorous quality inspection, the company will according to the product three packs of provisions, provide perfect customer service guarantee service for you, from the date of purchase, under normal conditions of use, provide 12 months guarantee for you, the following does not belong to the scope of warranty：

- Non FEK-5ND application
- Inappropriate workplace
- Inappropriate and beyond the application specified in the operating instructions
- Unauthorized transformation of the FEK-5ND
- Continue to use FEK-5ND in case of failure
- The manufacturer shall continue to maintain the equipment which has been used for more than 500000 times。
- Improper mold installation / repair
- Do not use the original pressure line and the original spare parts

Pneumatic end crimping machine